Returned to Mach III for factory repair, the letters “JHG” were stamped in the housing of this multiple disc friction clutch which is used on an accumulating conveyor. Under Mach III’s former date coding standard, this means the clutch was manufactured in October, 1987 – 28 years ago!
Designed for use at low air pressure to minimize wear, this clutch provides 2,300 pound inches of torque at just 30PSI and includes integral 60A21 and 60B21 sprockets. Mach III also produces combination clutch-brakes with integral double-single sprockets for chain driven live roller conveyor applications requiring a controlled stop to prevent drift of product, pallets or containers.
Developed as a retrofit replacement for a tooth clutch, this compact air actuated friction clutch provides . . .
- 208 pound inches torque @ 80 PSI
- 4.49 inches overall length
- 1.0 inch bore
- Double-single 60A19 sprockets
- Enclosed construction
. . . and unlike a tooth clutch, it provides a soft start and can be engaged dynamically at higher speeds.
This clutch is designed for use in a chain driven live roller conveyor.
Used on chain driven live roller conveyors (CDLR), these multi-disc air clutches offer a large amount of torque in a small package. They are designed for operation at low pressure (30 PSI) to maximize wear life and facilitate quick installation with push-in air fitting connections.
3 Inch Model: 362 Pound Inches @ 30 PSI, 0.75 Inch Bore, 40A20 Sprockets, 5.76 Inches Long x 3.5 Inches Diameter
4 Inch Model: 1191 Pound Inches @ 30 PSI, 1.0 Inch Bore, 50A20 Sprockets, 6.73 Inches Long x 4.5 Inches Diameter
5 Inch Model: 2,300 Pound Inches @ 30 PSI, 1.4375 Inch Bore, 60A21 Sprockets, 7.31 Inches Long x 5.73 Inches Diameter
Submit your accumulating conveyor application information using our online form,
or contact our engineering department to discuss your needs.