Engineering Assistance


Submit Application

Clutch-Brake Application Form

Download PDF


Contact Information

* Name:
* Title:
* Company:
* Phone:
* Email:
 
* Required Fields

PLEASE PROVIDE AS MUCH INFORMATION AS KNOWN
If possible, send a sketch of the drive system to:
engineering@machiii.com

1. Unit is needed for:


If Retrofit, why is current model being replaced?

2. Environmental Conditions - Check ALL that apply:













3. Temperature Range of the destination environment:

Minimum: ( specify °F / °C )
Maximum: ( specify °F / °C )

4. Clutch-Brake Mounting:


        Shaft Size:  ( specify in / mm )
        Keyway: Standard or Other:  ( specify in / mm )

        Shaft Size:  ( specify in / mm )
        Keyway: Standard or Other:  ( specify in / mm )
Select One:


        Drive Shaft Size:  ( specify in / mm )
        Drive Keyway: Standard or Other:  ( specify in / mm )
        Driven Shaft Size:  ( specify in / mm )
        Driven Keyway: Standard or Other:  ( specify in / mm )

        Size/Type:

5. Orientation of the shaft on which the clutch-brake will be mounted:


6. Pulley or Sprocket Requirements:


Type 
. . . . .Choose One:  
Chain Size:     # of Teeth: 
# of Grooves:     Belt Type: 

7. Motor Specs: HP:     RPM:

If not electric, please specify type here:

8. RPM at Clutch-Brake:  RPM

9. Clutch-Brake Configuration:  Clutch-Brake will. . . . .


10. Inertia Started/Stopped:  ( specify lb.ft2 / kg.m2 )

11. Required Clutch Torque:  ( specify lb.in / lb.ft / Nm )
       Required Brake Torque:  ( specify lb.in / lb.ft / Nm )

12. Cycle Rate:  X Per Minute

13. Operating Air Pressure Restrictions (if any):

Minimum:  PSI
Maximum:  PSI

14. Space Restrictions:

Maximum Length:  ( specify in / mm )
Maximum OD:  ( specify in / mm )

Additional Information
Please include any special requirements, environmental conditions, etc.

    

3D Model Request

 

Model Type: