Engineering Assistance


Submit Application

Accumulating Conveyor Application Form

Download PDF


Contact Information

* Name:
* Title:
* Company:
* Phone:
* Email:
 
* Required Fields

PLEASE PROVIDE AS MUCH INFORMATION AS KNOWN
If possible, send a sketch of the drive system to:
engineering@machiii.com

1. Unit is needed for:


If Retrofit, why is current model being replaced?

2. Environmental Conditions - Check ALL that apply:













3. Temperature Range of the destination environment:

Minimum: ( specify °F / °C )
Maximum: ( specify °F / °C )

4. Clutch Mounting:


        Shaft Size:  ( specify in / mm )
        Keyway: Standard or Other:  ( specify in / mm )

        Shaft Size:  ( specify in / mm )
        Keyway: Standard or Other:  ( specify in / mm )

        Size/Type:

5. Orientation of the shaft on which the clutch will be mounted:


6. Which will clutch drive when engaged (output)?


7. Sprocket Requirements:


Chain Size:     # of Teeth:

8. Motor Specs: HP:     RPM:

If not electric, please specify type here:

9. RPM at Clutch:  RPM

10. Cycle Rate:  X Per Minute

11. Weight Per Zone:  ( specify lb / kg )

12. Line Speed (Velocity):  ( specify feet per minute / meters per second )

13. Roller Diameter:  ( specify in / mm )

14. Ratio Between Roller and Clutch:  (If applicable)

15. Acceleration Time:  seconds

16. Deceleration Time:  seconds

17. Conveyor Coefficient Of Friction:  (If unknown we will assume 10%)

18. Operating Air Pressure Restrictions (if any):

Minimum:  PSI
Maximum:  PSI

19. Space Restrictions:

Maximum Length:  ( specify in / mm )
Maximum OD:  ( specify in / mm )

Additional Information
Please include any special requirements, environmental conditions, etc.

    

3D Model Request

 

Model Type: